Twinform — scan rooms and objects into 3D models with your iPhone.
Tap + and choose Room. Walk slowly around the room and point the camera at every wall, the floor and the furniture. The mesh appears over the camera view as you go; areas highlighted in amber have not been photographed yet. Tap Done when the room is covered. In the 3D preview, look in from above, or tap the walking figure to step inside.
Tap + and choose Object. Frame the object, then walk around it following the on-screen guidance. When capture finishes the model is built on your device; this takes a few minutes.
Which devices are supported? An iPhone or iPad with a LiDAR scanner (iPhone 12 Pro or later Pro models, iPad Pro 2020 or later). Object scanning also needs Apple Object Capture support on the device.
Are my photos uploaded? No. Scanning and processing happen on your device. With iCloud Sync turned on, finished models are stored in your own private iCloud.
Which export formats are available? USDZ, GLB (standard and lossless HD), STL, OBJ, and raw photos while a scan's capture frames remain.
Why does it need camera access? To photograph what you scan, for on-device reconstruction and texturing.
Questions, suggestions or feedback: mike_0528@163.com. We'll get back to you as soon as possible.
扫描房间：点 + 选「房间」，慢慢走动，把镜头对准每面墙、地面和家具；网格会实时铺在画面上，琥珀色区域表示还没拍到照片。覆盖完成后点「完成」。在 3D 预览中可从上方俯视，或点小人图标进入房间。
扫描物体：点 + 选「物体」，框住物体后按提示绕一圈；拍摄完成后在设备上生成模型，需要几分钟。
照片会上传吗？不会。扫描与处理都在设备本地完成；开启 iCloud 同步后，完成的模型仅存入你自己的 iCloud 私有库。
联系我们：mike_0528@163.com